Wednesday 8 September 2021
Why animals are preserved in science laboratory are kept in glass jars not in steel jars?
Tricks and tips for activation of window 10 pro free easily
Hello guys, in this article I am going to tell you about few and simple tricks and tips on how you can easily activate your window 10 pro free easily.
1) First of all, in your PC/ Laptop you have to go in search box option and type CMD, then you have to open CMD as an administrator and open.
2) In CMD type this code : i) slmgr.vbs /ipk W269N-WFGWX-YVC98B-4J6C9-T83GX then press Enter button.
3) Second code : ii) slmgr.vbs /skms kms.teevee.asia then press Enter button.
4) And last third code : iii) slmgr.vbs /ato then press Enter button.
And now your window 10 pro is successfully activated.
But in some cases, you will find your window 10 pro is not activated by this code, so it means that some files or folder corrupted in your PC/ Laptop.
So that's why your window 10 pro is not activated.
So in that case : 1) First you have to go in setting and in setting you will find update and security option and then you have to go in Recovery option, so in the Recovery option you have to select Reset option and then you have to Reset your PC/ Laptop Completely.
When you click on Reset option then it will show two option i) Keep files and folders ii) Remove files and folder everything so you go in Remove files and Folder.
After completing of Resetting of Pc/ Laptop then you have to update your window 10 pro and then uses above Code in CMD.
It will 💯 fix your issues !!!
Tuesday 7 September 2021
A train cross a tunnel in 20 seconds at the entry of the tunnel velocity is 72 km/hr and the exist of the tunnel 36 km/hr. Find the length of the tunnel.
Solution:-
t = 20 second.
u = 72 km/hr = 72×1000 / 3600
u = 20 m/s
v = 36 km/hr = 36×1000 / 3600
v = 10m/s
a = v - u / t
= 10 - 20 / 20
= -10 / 20
a = - 0. 5 m/s2
v2 = u2 + 2as
S = v2 - u2 / 2a
= (10)2 - (20)2 / (2 ) × (- 0.5)
= 100 - 400 / -1
= -300 / -1
S = 300 m
∴ The length of the tunnel is 300m.
Monday 6 September 2021
State applications of connectors used in optical fiber communication
1) Optical fiber connectors are used to join optical fiber where a connect /disconnect capability is required.
2) Optical fiber connectors are used in telephone exchange for customer premises wiring and in outside plant applications to connect equipment and fiber-optical cables.
3) Outside plant application may require connectors be located underground or on outdoors walls or utility poles.
Compare p-i-n and avalanche photodetector
Pin diode:-
1) PIN photodiode does not have a high intensity electric field region.
2) sensitivity is very low in PIN photodiode.
Avalanche photodetector:-
1) Avalanche photodetector is a high-intensity electric field region.
2) sensitivity is very high in Avalanche photodetector.
Give selection procedure of compensation.
1) In general there are two situation in which compensation is required.
2) In 1st case, the system is absolutely unstable & the compensation is required to stabilize, if as well as to achieve a specified performance.
3) In 2nd case the system is stable, but the compensation is required to obtain the desired performance.
4) The system which are type 2 or higher are usually absolutely unstable, for these type of system clearly load compensator increase the margin of stability.
5) In type 0, type 1 system stable operation is always possible, if the gain if sufficiently reduced. In Such cases any of the 3 compensator lead, lag and Lead lag may be used to obtained the desired performance.
Compare lead and lag compensator
Lead compensator
1) Introduce lead phase shift in the system
2) Improve transient response
3) Decrease rise time
4) Decrease settling time
5) Increase Bandwidth
6) Faster response
7) less overshoot
8) Increasing damping
Lag compensator
1) Introduce lag phase shift in the system
2) Improve steady state response
3) Increase rise time.
4) Increase settling time.
5) Decrease Bandwidth
6) Slow response
7) Increase overshoot.
8) Decrease damping
State function of switches in optical fiber link.
1) An optical switch is a device that selectively switches optical signals from one channel to another.
2) In commercial terms it refer to any piece of circuit switching equipment between fibers.
3) The switches are used to switch the traffic stream from primary fiber into another fiber in case the primary fiber fails.
What is the function of OTDR
i) OTDR detects faults going in the optical fiber link.
ii) Fast automatic testing.
iii) Troubleshoot the faults in optical fiber communication.
iv) Maintain optical telecommunication network.
Popular Posts
-
Ans : 1) This method cannot give the error, if inputs are other than the 3 standard test inputs. 2) Most of the times, this method gives ma...
-
The Applied Electronics MCQ || Test Revision paper !!! 1) The types of coupling used in the BJT (Bipolar Junction Transistor) amplifier. a)...
-
Controlled Rectifier: i) When SCR are used to convert AC to DC they have controlled output voltage, so it is called a controlled rectifier...
-
x2 – 5x + 2 = x3 x2 - 5x + 2 - x3 = 0 -x3 + x2 - 5x + 2 = 0 If we change the sign of these equation then, x3 - x2 + 5x - 2 = 0 Ans:- 3 No...
-
The - CPH4 Here , in this blog you get the complete detail about the CPH4 . The CPH4 stands for 6 - carboxytetrahydropterin synthase , this...
-
Hello dear all readers, Welcome to this new blog post concept, here you come to know that the merits and the demerits of the 'Huygens...
-
Here we come to know about the Huygen's construction of spherical wavefront. So let's come to know, i) The spherical wavefront is fo...
-
i) The linear relationship in between electrical control signal and the rotor speed over a wide range. ii) The inertia of rotor should be a...
-
Hi friends my name is Rajakumar, I am the student of Government Polytechnic Mumbai. As like ever...
-
Why we swing our arms when we walking ? Hello dear all my readers , Have you ever think ...